PA6-Polyamid6-Langglasfaserverbindungen mit hoher Zähigkeit für elektronische Geräte und Elektrowerkzeuge

PA6-LGF

PA6-modifizierte Kunststoffe verwenden reine PA6-Scheiben als Matrix und verbessern die inneren und äußeren Eigenschaften durch Mischen, Füllen, Verstärken, Copolymerisieren, Vernetzen und andere Methoden, was etwa 15 % des Anwendungsbereichs von PA6 ausmacht.

Der Langglasfasergehalt beträgt 20–60 %, und der Langglasfasergehalt wird entsprechend den verschiedenen Produkteigenschaften gesteuert. Es zeichnet sich durch hohe Festigkeit, hervorragende Hitzebeständigkeit und gute Schlagfestigkeit aus und kann das geringe Gewicht einiger Metallmaterialien ersetzen. Es wird häufig in Gehäusen von Elektrowerkzeugen, Gartengeräten, Zahnrädern, Sportgeräten, Autoteilen usw. verwendet.

Andere Spezifikation von PA6-LGF

Flammhemmendes PA6

PA6 material has poor flame retardant performance and belongs to flammable materials, but flame retardants can change the combustion characteristics of polymers. Through mechanical mixing method, flame retardants are added to the master material to change the flammable characteristics. The products are divided into: nitrogen flame retardants, phosphorus flame retardants, environmental protection bromine flame retardants, mineral filled flame retardants, which can be used in switches, low-voltage electrical housing, wiring terminals, circuit breakers, etc.

Toughen PA6

Mixed with an appropriate amount of toughening agent, the product has the characteristics of low temperature resistance, high flexibility, high fluidity, low shrinkage, low water absorption, high impact resistance, aging resistance and so on. It can be used for baby carriage parts, rolling belts, line clips, connectors and so on.

Application

In addition to the above applications, in high-end fields such as rail transit, medical treatment, military industry and aerospace, nylon 6 modified plastics are used more and more widely, and PA6 modified plastics are used everywhere in daily life.

TDS for reference

Nylon reinforced material is made of PA6/PA66 resin as the base material and adding a certain proportion of glass fiber modification. Because nylon itself is not strong enough, by adding 20 to 60 percent of the fiber, to increase its strength. In particular, 30% strength is considered the most appropriate ratio. Also added to 40-50%, according to the specific requirements of different products, coupled with the appropriate formula, can be successful.

Advantage of Long glass fiber compounds

1. After glass fiber reinforcement, glass fiber is a high temperature resistant material, therefore, the heat resistance temperature of reinforced plastics is much higher than before without glass fiber, especially nylon plastics;

2. After glass fiber reinforcement, due to the addition of glass fiber, limited the mutual movement between polymer chains of plastics, therefore, the shrinkage rate of reinforced plastics decreases a lot, rigidity is greatly improved;

3. After glass fiber reinforcement, the reinforced plastic will not stress crack, at the same time, the anti-impact performance of plastic is improved a lot;

4. After glass fiber reinforcement, glass fiber is a high strength material, which also greatly improves the strength of plastic, such as: tensile strength, compression strength, bending strength, improve a lot;

5. glass fiber reinforced after, due to the addition of glass fiber and other additives, the combustion performance of reinforced plastics decreased a lot, most of the material can not ignite, is a kind of flame retardant material.

Xiamen LFT composite plastic Co., Ltd.

Xiamen LFT Composite Plastic Co., Ltd. ist ein Markenunternehmen, das sich auf LFT&LFT konzentriert. Long Glass Fiber Series (LGF) und Long Carbon Fiber Series (LCF). Der thermoplastische LFT des Unternehmens kann auch für die LFT-D-Formung verwendet werden. Es kann nach Kundenwunsch hergestellt werden: 5~25 mm Länge. Die langfaserigen, durch kontinuierliche Infiltration verstärkten Thermoplaste des Unternehmens haben die Systemzertifizierung nach ISO9001 und 16949 bestanden und die Produkte haben zahlreiche nationale Marken und Patente erhalten.